How do I pair a new camera to the monitor?

(1) Power On Backup Camera first. Press and hold the Power Button under the camera for 6 seconds, or until the LED flashes Blue continuously. The camera will be turned on and enter Pairing Mode for one minute.

(2) On the Dash Monitor, Press "Menu" button and go to "Pair Camera". Press "Parking Aid line" button to confirm. The unit is now in pair mode.

(3) The camera should be paired within 60 seconds. If the pairing is successful, the display will show “Pair OK”.

(4) If no camera is found, then the display will show “Pair Fail”. In this case, cut off power and reboot the Dash Monitor. If you keep receiving the “Pair Fail” message after several attempts, please call our technical support to assist in troubleshooting.

Was this article helpful?
0 out of 0 found this helpful